topic Re: TDA8034 Config using GPIO in Other NXP Products

TDA8034 Config using GPIO

davidsagasta97 — Fri, 12 Nov 2021 10:59:14 GMT

Hi!

I am using a PN7642 to communicate with 2 SAMs, and the other one is using a TDA8034HN.

I am looking for an example that initialites the TDA using the GPIOs instead of the I2C, since the 8034 doesnt have any and in the SW3683, i cant find any example that uses any TDA.

Any example that has TDA in it, or uses the SAM secondary slot using TDA would be highly appreciated.

Thanks and have a good day!

Re: TDA8034 Config using GPIO

Fabian_R — Fri, 12 Nov 2021 18:49:46 GMT

Hello sir,

Thank you for using our community, unfortunately, we don´t have an example that may help you in achieving this task.

Please check our Reader Library and you may want to check the API for the PN7462.

Please go to:

PN7462AU > phCommon > inc > phhalGpio.h.

Here, you will find the configurations and value settings.

I really hope someone in our community may have a full example that they could provide for you to start.

Have a great day!