topic Re: Pegoda RD710 BAL interface error while connecting in Other NXP Products

Pegoda RD710 BAL interface error while connecting

KarpMen — Wed, 15 Sep 2021 12:20:38 GMT

Hi, I am facing a problem connecting to a Pegoda reader RD710. The error returned is BAL Interface error.

The reader has all switch in off (PCSC mode), the OS is Windows 10 pro, the connection test was made by different softwares like RFDDiscover and custom application.

I've already checked the service Certificate Propagation, and if I stop this service the reader is not visible at all.

Any help is appreciated, thanks

Re: Pegoda RD710 BAL interface error while connecting

fangfang — Thu, 16 Sep 2021 02:22:08 GMT

Hello,

Please refer to the information as the thread.

URL:https://community.nxp.com/t5/NFC/quot-BAL-INTERCAFE-ERROR-quot-with-RFIDDiscoverLite/m-p/907170.

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

Re: Pegoda RD710 BAL interface error while connecting

Tokenaton — Thu, 16 Sep 2021 06:48:57 GMT

Hi Fang I have already read that post but that solution not resolve my situation I have tried without putting up the tag and I have the same bal interface error.

Re: Pegoda RD710 BAL interface error while connecting

KarpMen — Mon, 20 Sep 2021 06:15:18 GMT

Hi Fang I have already read that post but that solution not resolve my situation I have tried without putting up the tag and I have the same bal interface error.

Re: Pegoda RD710 BAL interface error while connecting

fangfang — Wed, 22 Sep 2021 01:58:27 GMT

Hello,

Can you provide detailed test information? Let me see if I can reproduce your question.

Have a nice day.

Re: Pegoda RD710 BAL interface error while connecting

KarpMen — Thu, 23 Sep 2021 20:36:30 GMT

Thi is a sequence with card test framework

Re: Pegoda RD710 BAL interface error while connecting

fangfang — Tue, 28 Sep 2021 02:40:02 GMT

Hello

I tested the question using the Pegoda reader RD710 and the full RFIDDiscover. But can't reproduce the question. Did you use RFIDDisover is RFIDDisover Lite or the full RFIDDisover? For the information please refer to the link.

URL:https://www.nxp.com/products/rfid-nfc/mifare-hf/mifare-desfire/rfiddiscover:RFID-DISCOVER

Have a nice day.

Re: Pegoda RD710 BAL interface error while connecting

KarpMen — Wed, 29 Sep 2021 09:42:12 GMT

Hi,

I've used card test framework, but the same happen with RFIDDiscover lite/full no difference at all.

I think there is a kind of registry entry, settings in windows that influence the result, but it is not the propagation service.

regards