Reg: Debuggers for LPC2468

Haritha — Mon, 14 Jun 2021 07:50:51 GMT

Hello,

In my project LPC2468 and LPC2368 controllers are connected in a JTAG chain and i am trying to debug the LPC2468 controller using KEIL ULINK ME debugger and i am getting JTAG communication failure in debugger window of Traget options on Keil uvision 5.22.

Note: Supported debuggers list as shown in debugger window of Traget options on Keil ULINK ME ARM.

Is there any difference between ULINK ME ARM and KEIL ULINK ME Debbugers.

Please help me out...

Re: Reg: Debuggers for LPC2468

Omar_Anguiano — Thu, 17 Jun 2021 18:40:09 GMT

Hello

Hope you are well.
Note that generally we would not recommend using the old ARM7 based LPC2xxx MCUs for new projects, but rather look at using a Cortex-M-based MCU.
I suggest you refer to this page con configure your debugger: https://www.keil.com/support/man/docs/ulinkme/ulinkme_setup.htm

If you have more questions do not hesitate to ask me.
Best regards,
Omar

Other NXP ProductsのトピックRe: Reg: Debuggers for LPC2468

Reg: Debuggers for LPC2468

Re: Reg: Debuggers for LPC2468