PN553 Wakeup_req pin default bias

c_adharumaraj — Mon, 14 Jun 2021 07:46:20 GMT

Hi,

We are using a PN553 in an android board for NFC. Have a question regarding the WAKE_UP REQ pin on the PN553.

Currently it is not used. But we would like to understand the default bias on this pin and also any pointers to a register which controls this will be very helpful.

This is for a debugging activity.

Regards,

Ashwat

Re: PN553 Wakeup_req pin default bias

fangfang — Tue, 15 Jun 2021 03:19:36 GMT

Hello,

As you may know this device is not public in our website this is out of our scope for support since this is a confidential device, the path to get support or information would be that you contact your distributor.

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

topic Re: PN553 Wakeup_req pin default bias in Other NXP Products

PN553 Wakeup_req pin default bias

Re: PN553 Wakeup_req pin default bias