topic Re: Cannot flash or debug Devkit ZVL128 with Code Warrior in NXP Designs

Cannot flash or debug Devkit ZVL128 with Code Warrior

Matisse_Boffy — Mon, 05 Oct 2020 07:07:52 GMT

Dear all,

I recently received a new Devkit ZVL128, but when trying to flash it using CodeWarrior, the following error appear :

"an invalid preference was passed to the GDI protocol plugin(HC/RS/S12Z GDI Protocol Adapter) Error: command failed " (See attached file)

I also tried to enter debug mode on a example project and I got stuck in an endless loop. (See attached file)

Any clues ?

Regards,

Matisse

Re: Cannot flash or debug Devkit ZVL128 with Code Warrior

dianabatrlova — Tue, 06 Oct 2020 13:11:50 GMT

Dear Matisse,

At first, could you please, try to create a new project for S12ZVL128 and try to load the project into MCU using debug configuration option?

Which PE micro multilink do you use?

Thank you.

Best regards,

Diana

Re: Cannot flash or debug Devkit ZVL128 with Code Warrior

Matisse_Boffy — Wed, 21 Oct 2020 06:30:51 GMT

Dear dianabatrlova, thank you for your answer,

As mentionned above, If I try to enter debug mode, Code Warrior gets stuck in an endless loop, even with a new project ( Verifying object file CRC-16 to device ranges ...
INF: block 00FE0000-00FE0120 ...)

I tried to flash/debug with the onboard debugger and with an external PE multilink debugger, same issue occurs.

Regards,

Matisse

Re: Cannot flash or debug Devkit ZVL128 with Code Warrior

Matisse_Boffy — Wed, 21 Oct 2020 06:58:35 GMT

Problem solved : I ordered a ZVL32 instead of a 128.