NXP DesignsのトピックRe: Need a PX4 Robotic Drone CAD file

Need a PX4 Robotic Drone CAD file

g_h89 — Fri, 03 Apr 2020 15:01:14 GMT

Hello guys, i am working on a cover design project for PX4 robotic drone and i was wondering if anyone had a CAD file of the drone or the main body, that they could let me borrow?

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Fri, 03 Apr 2020 22:13:12 GMT

Just to clarify, this is for the physical drone, not the electronics or case for the flight controller (RDDRONE-FMUK66?)
I have a rough CAD file, but it doesn't quite give enough detail on the top plate where you would create a cover.
I'll check though various files and get back to you.
hovergames fmuk66 #rddrone-fmuk66

#kit-hgdronek66‌ #mobile robotics‌

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Fri, 03 Apr 2020 22:42:21 GMT

yes sir that's correct its for the physical drone, and i don't need too much detail. Thank you, i appreciate the help very much.

Re: Need a PX4 Robotic Drone CAD file

Fabian_R — Fri, 03 Apr 2020 23:13:41 GMT

Hello Guillermo,

The files will be available to download next week in the following link: https://www.nxp.com/design/designs/px4-robotic-drone-fmu-rddrone-fmuk66:RDDRONE-FMUK66

Thank you.

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Mon, 06 Apr 2020 18:52:25 GMT

Hi Fabian, I think the files you are mentioning are the ECAD files (schematic and board files). Guillermo is looking for a mechanical design for the overall drone frame. I have an approximate one just about to hunt it down.

Meanwhile - there is a mechanical design for the FMU case here: HoverGames RDDRONE-FMUK66 RevC Case by igalloway - Thingiverse

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Wed, 08 Apr 2020 14:48:23 GMT

were you able to hunt those files down Iain?

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Wed, 08 Apr 2020 17:53:04 GMT

HoverGames Drone frame model by igalloway - Thingiverse

@Guillermo Huerta g_h89@txstate.edu‌ Here is what i have found.

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Wed, 08 Apr 2020 18:01:26 GMT

I have this in MCAD. If you had time to help measure the details and write them down a bit i might be able to add more detail to the top and bottom plates ("frame-board")

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Wed, 08 Apr 2020 18:04:46 GMT

that'll work man, ill have to add the gps antenna since we have to work around that but i can do that. i appreciate it

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Wed, 08 Apr 2020 18:06:06 GMT

Also the FMU Case is available here as well https://www.thingiverse.com/thing:3672194

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Wed, 08 Apr 2020 19:07:11 GMT

okay thank you, and if you want to email me that cad file my email is guillermohuerta14@live.com

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Thu, 09 Apr 2020 14:12:18 GMT

I did also post the STEP files (MCAD) on thingiverse here: https://community.nxp.com/external-link.jspa?url=https%3A%2F%2Fwww.thingiverse.com%2Fthing%3A4270674

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Thu, 09 Apr 2020 17:26:35 GMT

when i opened the step file on solidworks it shows a circuit board, not the drone body? i dont know if im doing something wrong

Re: Need a PX4 Robotic Drone CAD file

g_h89 — Thu, 09 Apr 2020 17:31:02 GMT

ignore my last comment i figured it out. again thank you so much for the help man!

Re: Need a PX4 Robotic Drone CAD file

iaingalloway — Mon, 20 Apr 2020 12:09:13 GMT

I have added more accurate top plate file to thingiverse.

Re: Need a PX4 Robotic Drone CAD file

Shake21 — Wed, 30 Nov 2022 11:45:24 GMT

Hello, I am planning to build a mount for raspberry pi. Can I have the cad model of this or at least the dimensions of the plate? Thank You..

Re: Need a PX4 Robotic Drone CAD file

pardz — Wed, 28 Dec 2022 17:32:17 GMT

Dear @iaingalloway ,

When clicking the link provided above to the thingiverse page it is unable to download the detailed top-plate design which I require, all other parts are able to be downloaded and viewed/modified in Fusion 360. Is their anyway you could send me a direct copy of the detailed top plate as I require it for further development ?

Kind regards

Pards

Re: Need a PX4 Robotic Drone CAD file

pardz — Wed, 28 Dec 2022 17:38:01 GMT

@iaingalloway ,

When reviewing the files in thingiverse It does not allow me to download the detailed top plate, even when downloading the entire folder whereby I am able to open/modify all the files in fusion 360, the only file that is missing is the detailed top plate as highlighted above. Is there anyway this could be rectified/sent directly to me ?

Kind regards

Pards