LX2160 TFTP enabled

ranga_yn — Thu, 20 Feb 2020 08:02:15 GMT

with LSDK 19.09 SD boot I have 2 questions :

1. when the Ethernet is connected to the 1G MAC 17 and tried to setup the TFTP with the server - Ping is always failing.

Is there any make changes /build changes which need to be made on LX2160 . TFTP on 2088 is working fine for US.

2. qixis_reset SD is the resetting the Board and freezes on LX2160 . Any specific reason for this.

Re: LX2160 TFTP enabled

yipingwang — Fri, 21 Feb 2020 08:49:41 GMT

1. Please check whether MC firmware, DPC and DPL have been deployed in SD card.

SD start block no. QSPI/XSPI

DPAA2-MC 0x05000 0xa00000

DPAA2 DPL 0x06800 0xd00000

DPAA2 DPC 0x07000 0xe00000

MC firmware:

$ flex-builder -c mc_bin -m lx2160ardb

build/firmware/mc_bin/lx2160a/mc_10.18.0_lx2160a.itb

DPL and DPC:

$ flex-builder -c mc_utils -m lx2160ardb

build/firmware/mc_utils/config/lx2160a/RDB/

2. Have you deployed SD firmware image into SD card?

$ flex-builder -i mkfw -m lx2160ardb -b sd

flexbuild_lsdk1909/build/images/firmware_lx2160ardb_uboot_sdboot.img

Please deploy the firmware at block 8 on SD card.

Thanks,

Yiping