Reading Gear value in PN553

c_adharumaraj — Thu, 25 Nov 2021 09:55:24 GMT

Hi,

We are using a PN553 in an android board for NFC. We are doing some experiments with antenna placement for wider footprint and range.

For this we are trying to identify weak coupling areas with different TVDD voltages (3.3/5V). We want to do this by sending a single ReqB command and measuring the Gear value.

Can you please let us know how we can measure the Gear value in PN553?

Thanks in advance

Re: Reading Gear value in PN553

fangfang — Fri, 26 Nov 2021 02:41:24 GMT

Hello,

As you may know this device is not public in our website this is out of our scope for support since this is a confidential device, the path to get support or information would be that you contact your distributor.

Have a nice day.

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-----------------------------------------------------------------------------

topic Reading Gear value in PN553 in NFC

Reading Gear value in PN553

Re: Reading Gear value in PN553