System services have not been validated with this version of GCC

db_1017 — Fri, 12 Feb 2021 11:48:25 GMT

We are getting few warnings while building code for PN7462 kit. and software version PN7462AUPspPackageFull-v05_22_01.

1.. "System services have not been validated with this version of GCC"

Is this warning critical and should be corrected or can be ignored? I tried updating MCUxpresso its latest version : MCUXpresso IDE v11.3.0 [Build 5222] [2021-01-11]

2. Here are screenshot of all the warnings

3. When i clicked on each warning it took to source code:

4. What is this "Info" ?

Re: System services have not been validated with this version of GCC

Kan_Li — Thu, 25 Feb 2021 09:11:19 GMT

Hi @db_1017 ,

1.. "System services have not been validated with this version of GCC"

- It is not critical, and you may just ignore it or update the source file as below:

and from my side, I just see two warnings, and my IDE is MCUXpresso IDE v11.3.0 [Build 5222] [2021-01-11], is it the same with you?

Basically they are not critical either. The demos are validated before release.

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!
- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic System services have not been validated with this version of GCC in NFC

System services have not been validated with this version of GCC

Re: System services have not been validated with this version of GCC