programming PN5180 development kit (OM25180FDK) by LPC on the board

steve_wilson — Mon, 12 Oct 2020 10:40:53 GMT

Hi,

I wanted to run provided examples like basicloop on the pn5180 board, I used mcuxpresso ide.

the kit I use is PN5180 development kit (OM25180FDK).

I created hex file, I could not find anyway to load on kit.

is there anything to load this hex file except using lpc debugger (LPC-Link 2) ?

Thank you

Re: programming PN5180 development kit (OM25180FDK) by LPC on the board

nxf58474 — Mon, 12 Oct 2020 18:10:44 GMT

Hi,

Hope you are doing well. You need an external debugger to program the LPC on the board. In this case, the best would be to use a LPC-Link2.

Best Regards,

Ricardo