PR5331 whether support to read 7816 type A

michael_yang — Thu, 26 Mar 2020 10:33:10 GMT

we use NXP,PR5331C3HN/C370E NFC reader IC, use 7816 type A card to read and will be USB disconnected. we don’t use this type of card 7816 type A before the test so no problem was found, we need to know PR5331 whether support to read 7816 type A or their software not add this drive?

Re: PR5331 whether support to read 7816 type A

IvanRuiz — Thu, 26 Mar 2020 20:57:56 GMT

Hello,

Please accept my apologies but this protocol is not supported by this device. For the supported protocols, please check chapter 1. General description of datasheet: https://www.nxp.com/docs/en/nxp/data-sheets/PR533.pdf

Have a nice day!

BR,

Ivan.

Re: PR5331 whether support to read 7816 type A

michael_yang — Tue, 31 Mar 2020 03:34:30 GMT

hello,

NRR found that the usb communication link with PR533 is broken, if repeatedly calling the ISO/IEC14443 Type A command such as Select(AID) in each 2-3 seconds.

The following is the detailed scenario and PCSC log information of the problem. Please advise to fix the problem, thanks!

Scenario

Tested NRR (PCD) with mobile phone (PICC)
NFC-A mobile phone (PICC) with FWTI = 4
Continuously sending NFC-A commands as follows, and error occurs occasionally (usually within 15 min):

	Normal Case	Error Case
(NRR)	REQA	REQA
(mobile)	ATQA	ATQA
(NRR)	ANTICOLLISION	ANTICOLLISION
(mobile)	UID CLn	UID CLn
(NRR)	SELECT	SELECT
(mobile)	SAK	SAK
(NRR)	RATS	RATS
(mobile)	ATS	ATS
(NRR)	APDU Command (e.g., Select AID)	APDU Command (e.g., Select AID)
(mobile) (NRR) …	S(WTX) Request S(WTX) Response S(WTX) Request S(WTX) Response … S(WTX) Request S(WTX) Response	S(WTX) Request S(WTX) Response S(WTX) Request S(WTX) Response … S(WTX) Request S(WTX) Response
(mobile)	APDU Response	S(WTX) Request
(NRR)	-	No response from PCD for ~1.5s S(DESELECT) after 2s timeout
(mobile)	-	S(DESELECT)

Observation when error case happens:
- No response from NRR
- USB device (PR533) was found to be disconnected
- Related PCSC log:

_[36m00000155_[0m _[35mifdwrapper.c:527:IFDTransmit() Card not transacted: 612_[0m

_[36m00000134_[0m _[35mwinscard.c:1606:SCardTransmit() Card not transacted: 0x80100016_[0m

_[36m00000127_[0m winscard.c:1626:SCardTransmit() UnrefReader() count was: 3

_[36m00000148_[0m winscard_svc.c:606:ContextThread() TRANSMIT rv=0x80100016 for client 9

_[36m00000618_[0m winscard_svc.c:317:ContextThread() Received command: DISCONNECT from client 9

_[36m00000264_[0m readerfactory.c:766:RFReaderInfoById() RefReader() count was: 2

_[36m00000164_[0m winscard.c:851:SCardDisconnect() Active Contexts: 8

_[36m00000132_[0m winscard.c:852:SCardDisconnect() dwDisposition: 0

_[36m00000153_[0m winscard.c:1044:SCardDisconnect() UnrefReader() count was: 3

_[36m00000167_[0m winscard_svc.c:488:ContextThread() DISCONNECT rv=0x0 for client 9

_[36m00000728_[0m winscard_svc.c:317:ContextThread() Received command: CONNECT from client 9

_[36m00000253_[0m winscard.c:235:SCardConnect() Attempting Connect to NXP PR533 (3.70) 00 00 using protocol: 0

_[36m00000158_[0m readerfactory.c:739:RFReaderInfo() RefReader() count was: 2

_[36m00000135_[0m winscard.c:422:SCardConnect() Direct access: no protocol selected

_[36m00000154_[0m winscard.c:429:SCardConnect() hCard Identity: 56653f3b

_[36m00000156_[0m winscard.c:490:SCardConnect() UnrefReader() count was: 3

_[36m00000167_[0m winscard_svc.c:451:ContextThread() CONNECT rv=0x0 for client 9

_[36m00010802_[0m winscard_svc.c:317:ContextThread() Received command: TRANSMIT from client 9

_[36m00000303_[0m readerfactory.c:766:RFReaderInfoById() RefReader() count was: 2

_[36m00000167_[0m winscard.c:1581:SCardTransmit() Send Protocol: T=4

_[36m00000219_[0m _[34mAPDU: FF C2 00 00 07 80 03 01 00 00 81 00 00 _[0m

_[36m00000145_[0m _[34mifdhandler.c:1262:IFDHTransmitToICC() usb:1fc9/010b:libudev:0:/dev/bus/usb/002/003 (lun: 0)_[0m

_[36m00001222_[0m _[01;31mccid_usb.c:660:WriteUSB() write failed (2/3): -99 Invalid argument_[0m

_[36m00000138_[0m _[34mSW: _[0m

_[36m00000146_[0m _[35mifdwrapper.c:527:IFDTransmit() Card not transacted: 612_[0m

_[36m00000130_[0m _[35mwinscard.c:1606:SCardTransmit() Card not transacted: 0x80100016_[0m

_[36m00000129_[0m winscard.c:1626:SCardTransmit() UnrefReader() count was: 3

_[36m00000357_[0m winscard_svc.c:606:ContextThread() TRANSMIT rv=0x80100016 for client 9

_[36m00000655_[0m winscard_svc.c:317:ContextThread() Received command: CONNECT from client 9

_[36m00000430_[0m winscard.c:235:SCardConnect() Attempting Connect to NXP PR533 (3.70) 00 00 using protocol: 0

_[36m00000156_[0m readerfactory.c:739:RFReaderInfo() RefReader() count was: 2

_[36m00000137_[0m winscard.c:422:SCardConnect() Direct access: no protocol selected

_[36m00000355_[0m winscard.c:429:SCardConnect() hCard Identity: 71b586eb

_[36m00000192_[0m winscard.c:490:SCardConnect() UnrefReader() count was: 3

_[36m00000180_[0m winscard_svc.c:451:ContextThread() CONNECT rv=0x0 for client 9

_[36m00008962_[0m _[34mhotplug_libudev.c:587:HPEstablishUSBNotifications() Device removed_[0m

_[36m00005891_[0m winscard_svc.c:317:ContextThread() Received command: TRANSMIT from client 9

_[36m00000314_[0m readerfactory.c:766:RFReaderInfoById() RefReader() count was: 2

_[36m00000164_[0m winscard.c:1581:SCardTransmit() Send Protocol: T=4

_[36m00000220_[0m _[34mAPDU: FF C2 00 00 07 80 03 01 00 00 81 00 00 _[0m

_[36m00000145_[0m _[34mifdhandler.c:1262:IFDHTransmitToICC() usb:1fc9/010b:libudev:0:/dev/bus/usb/002/003 (lun: 0)_[0m

_[36m00000375_[0m _[01;31mccid_usb.c:660:WriteUSB() write failed (2/3): -4 No such device_[0m

_[36m00000126_[0m _[34mSW: _[0m

_[36m00000141_[0m _[35mifdwrapper.c:527:IFDTransmit() Card not transacted: 617_[0m

_[36m00000310_[0m _[34mutils.c:68:SendHotplugSignal() Send hotplug signal to pcscd (pid=1288)_[0m

Re: PR5331 whether support to read 7816 type A

IvanRuiz — Wed, 01 Apr 2020 20:59:14 GMT

Hello,

Please accept my apologies, but the implementation with emulated PICCs in mobile devices has not been tested and we cannot recreate the environment for this specific implementation.

Thank you for your comprehension.

BR,

Ivan.

NFCのトピックRe: PR5331 whether support to read 7816 type A

PR5331 whether support to read 7816 type A

Re: PR5331 whether support to read 7816 type A

Re: PR5331 whether support to read 7816 type A

Re: PR5331 whether support to read 7816 type A