NFCのトピックregarding the power down current on PA5180 https://community.nxp.com/t5/NFC/regarding-the-power-down-current-on-PA5180/m-p/598645#M652 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>I am comparing NXP's &nbsp;NFC front-end solution with AS3911B for our EMV-compliant payment devices.</P><P>The Ipd (typical) is 15uA , but it is only 0.7uA based on the AS3911B. can you advise &nbsp;if there is a way to make &nbsp;PA5180&nbsp;drop &nbsp;lower current such as 1uA in power down mode?&nbsp;</P><P></P><P>Also , do you mind proving me a detailed comparison comparing with AS3911B in terms of power consumption, RF performance and so on?</P><P></P><P>Appreciate your reply!</P></BODY></HTML> Mon, 20 Mar 2017 06:33:12 GMT jasonz 2017-03-20T06:33:12Z regarding the power down current on PA5180 https://community.nxp.com/t5/NFC/regarding-the-power-down-current-on-PA5180/m-p/598645#M652 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P>I am comparing NXP's &nbsp;NFC front-end solution with AS3911B for our EMV-compliant payment devices.</P><P>The Ipd (typical) is 15uA , but it is only 0.7uA based on the AS3911B. can you advise &nbsp;if there is a way to make &nbsp;PA5180&nbsp;drop &nbsp;lower current such as 1uA in power down mode?&nbsp;</P><P></P><P>Also , do you mind proving me a detailed comparison comparing with AS3911B in terms of power consumption, RF performance and so on?</P><P></P><P>Appreciate your reply!</P></BODY></HTML> Mon, 20 Mar 2017 06:33:12 GMT https://community.nxp.com/t5/NFC/regarding-the-power-down-current-on-PA5180/m-p/598645#M652 jasonz 2017-03-20T06:33:12Z Re: regarding the power down current on PA5180 https://community.nxp.com/t5/NFC/regarding-the-power-down-current-on-PA5180/m-p/598646#M653 <HTML><HEAD></HEAD><BODY><P>Dear&nbsp;<A _jive_internal="true" class="" data-content-finding="Community" data-userid="296275" data-username="jasonz@questps.com.au" href="https://community.nxp.com/people/jasonz@questps.com.au">Jason Zhang</A>,</P><P>I was looking in the data sheet and unfortunately this &nbsp;current values you need can not be reached.</P><P></P><P>Best regards</P><P>Jonathan</P></BODY></HTML> Thu, 30 Mar 2017 17:12:49 GMT https://community.nxp.com/t5/NFC/regarding-the-power-down-current-on-PA5180/m-p/598646#M653 Jonathan_Iglesias 2017-03-30T17:12:49Z