topic PN7XXX Family flash programing in NFC

PN7XXX Family flash programing

damianogilioli — Thu, 18 Apr 2019 12:21:19 GMT

Hi All,

I'm using a PN7362 and I'd like to perform a flash programming via SWD (with LPCXpresso) without the IDE MCUXpresso but with a simple Software like Flash Magic. Unfortunately I'm not able to perform the programming with Flash Magic because doesn't support PN7XXX family. Is available unother PC software?

Thank you

Re: PN7XXX Family flash programing

Kan_Li — Wed, 24 Apr 2019 06:04:57 GMT

Hello,

You may try jlink instead. Please refer to the following for details.

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: PN7XXX Family flash programing

damianogilioli — Wed, 24 Apr 2019 08:14:16 GMT

Hello,

thank you Kan Li for the reply.

I'd like to perform the programming with LPC-Link 2, Is there another PC Software avalilable?

Re: PN7XXX Family flash programing

Kan_Li — Thu, 25 Apr 2019 03:15:17 GMT

Hello,

LPC-Link 2 can be used as a jlink, please refer to LPCScrypt v2.1.0 | NXP for details.

Hope that helps,

Have a great day,
Kan

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!