How to do the card emulation for PN5180 using Cockpit

yjshih — Fri, 21 Apr 2017 17:16:00 GMT

Dear Sir:

I try use the PN5180 development board to do the card emulation function.

And I want to use Cockpit to emulate. But in vain.

How to do? Direct write register?

YJS

Re: How to do the card emulation for PN5180 using Cockpit

weidong_sun — Tue, 02 May 2017 01:08:56 GMT

Hi,

In NFC reader lib, we gave example code for card emaulation, see http://www.nxp.com/documents/user_manual/UM10954.pdf

4.7 Example 8 – HCE T4T

Example 8 implements a Type 4 Tag card emulation according to NFC Forum Type 4

Tag specification. The example supports all specified commands such as

Select,ReadBinary,Update Binary.

With this example our reader is in card emulation mode (HCE) and it support reading and

writing data. Default data is configured as an NDEF message as a url

The maximum NDEF length the reader can write is limited by NDEF file size used in

example (default configured as 1024 bytes).

Regards,

Weidong