NCF29A1_pragramming

hamid_abrishami — Mon, 27 Jan 2025 08:15:09 GMT

Hey there!

I hope you’re doing great!

We're diving into an exciting project with the NCF29A1 and have received the datasheet under our NDA. As someone who loves exploring every nook and cranny of embedded systems, I’m reaching out to tap into your expertise.

I’m curious if there are any alternative options to the "2-Link MRK3" for programming, perhaps JTAG or a PE programmer? Also, would it be feasible to use popular IDEs like IAR for our development, or should we stick with the OM6717B?

Thanks a ton for your guidance—I’m really looking forward to hearing your insights!

Best,

Re: NCF29A1_pragramming

Daniel_Gutierrez — Mon, 27 Jan 2025 18:14:08 GMT

Hello @hamid_abrishami, Good Day!

Thank you very much for your interest in our products.

Unfortunately, given the NFC29A1 is an automotive product, we cannot provide support regarding this device as it is highly secure, and this is not a secure communication channel to share any information about it.

However, you could take a look at the 2-Link User Guide to find out more about its supported architectures and the usage of the OM6717B MRKIII Tool Chain, SDK and C-Compiler.

For further support on this topic, please redirect your request to your distributor, or the person that provided you with the part and information about it in a first place.

My best regards,
Daniel.

topic NCF29A1_pragramming in NFC

NCF29A1_pragramming

Re: NCF29A1_pragramming