Getting started with OM2NTP5332 NTAG 5 development board

Vagni — Wed, 26 Jun 2024 12:15:23 GMT

I started working with OM2NTP5332 NTAG 5 development board. I read RM00230 getting started guide and downloaded "SW6090 - NTAG 5 Development kit source code and library for LPC11U37 microcontroller". This package contains NTAG 5 middleware library ntag5_1.0.0: this middleware must be adapted to the hardware peripherals of the used host microcontroller.

I would like to drive OM2NTP5332 board with a custom board of mine through the Arduino connectors.

RM00230 refers to "RM00229 - NTAG 5 Middleware portation guide": where can I get it in order to port the NTAG 5 middleware on my custom board?

RM00230 refers to " SW5870 - NTAG 5 Development kit Android application source code". The NTAG 5 Explorer app on Google Play is the app to be used with OM2NTP5332 ?

Re: Getting started with OM2NTP5332 NTAG 5 development board

Fabian_R — Thu, 27 Jun 2024 20:38:04 GMT

Hello, my name is Fabian, I've been assigned to support your case.

Thank you for your interest in our products

Unfortunately, RM00229 wasn't released but, please take a look at the following community document: https://community.nxp.com/t5/NFC-Knowledge-Base/Guide-for-using-NTAG-5-with-LPC55S69/ta-p/1114331

Regarding the SW5870 no, NTAG 5 Explorer is for specific demo cards. For the SW5870, please take a look at RM00221. There is a full explanation of the Android project.

topic Re: Getting started with OM2NTP5332 NTAG 5 development board in NFC

Getting started with OM2NTP5332 NTAG 5 development board

Re: Getting started with OM2NTP5332 NTAG 5 development board