NFCのトピックRe: Reference design file for MFRC522

Reference design file for MFRC522

Ram_RAM — Mon, 03 Jul 2023 14:24:02 GMT

Hi ,

In our design we are planing to use this NFC IC "MFRC522". so requsting to share any reference design file to understand the circuit design.

Thanks.

Re: Reference design file for MFRC522

Tomas_Parizek — Wed, 05 Jul 2023 05:11:49 GMT

Hello Ram_RAM,

As the MFRC522 is not recommended for new designs I would suggest going for MFRC63003HN.

MFRC63003HN: https://www.nxp.com/part/MFRC63003HN#/

The MFRC63003HN is based on the CRLC663 family, so there is a full package of support materials (including reference design) available.

CRLC663: https://www.nxp.com/products/rfid-nfc/nfc-hf/nfc-readers/clrc663-iplus-i-family-high-performance-nfc-frontends:CLRC66303HN

Tomas

Re: Reference design file for MFRC522

Ram_RAM — Wed, 12 Jul 2023 18:46:40 GMT

Hi Tomas,
Good day!,
Thank you for your suggestion,
But if there is some reference design please share with me, because we have already brought this IC .
So we are planning to go with this now , in later we will study the IC that you suggest.

Thanks,
Ram

Re: Reference design file for MFRC522

Tomas_Parizek — Fri, 14 Jul 2023 12:35:15 GMT

Hello Ram_RAM,

I think that this page could help you: https://www.nxp.com/products/rfid-nfc/mifare-hf/mifare-desfire/pegoda-contactless-smart-card-reader-based-on-mfrc523:MFEV710

This reader is based on the MFRC523 which is essentially the same as MFRC522. The difference is only in supported standards.

The reference design can be found here:

Tomas

Re: Reference design file for MFRC522

Ram_RAM — Fri, 14 Jul 2023 14:05:53 GMT

Hi Tomas,
Good day!,
Thanks a lot .....