topic Re: About SDADC in MPC5xxx

About SDADC

junyishen — Thu, 04 May 2017 12:51:21 GMT

What's the relationship between analog voltage and sampled data of SDADC transferred to SDMA??What is the specific formula??

Re: About SDADC

junyishen — Thu, 04 May 2017 12:54:43 GMT

Or how can I make sure that the sampled data is correct?

Can I display matrix data as a chart on the S32 V1.1?This looks more intuitive.

Re: About SDADC

eleclin — Fri, 05 May 2017 02:58:59 GMT

Hello junyi

Can you read the sampled data of SDADC transfeered by SDMA in SRAM？ In my project, FRM_ACQ_DONE flag was set but there was no data in SRAM (there were all zeros). Could you show me your example code?
Also are you working on MPC5775K ? If possible, could you contact me or give me your contact information（QQ or WeChat）. My QQ is 631596129.

Regards

Hai

Re: About SDADC

martin_kovar — Fri, 05 May 2017 07:29:16 GMT

Hello Hai,

Radar module is complex set of features and the configuration are very customer specific so this module is not supported directly. Please contact a NXP sales representative person for your region. He will decide if it is important business and if you will get NXP field application engineer for direct support.

http://www.nxp.com/about/about-nxp/worldwide-locations/worldwide-sales-offices/distributor-network:DISTRIBUTORS?fsrch=1&sr=1&pageNum=1

Another possibility is to buy professional services.

http://www.nxp.com/products/software-and-tools/software-support-and-services/professional-support-and-service-resources/professional-support-for-microcontrollers:PREMIUM-SUPPORT

Regards,

Martin