https://community.nxp.com/t5/MPC5xxx/IPWM-and-IPM/m-p/658863#M7165 <HTML><HEAD></HEAD><BODY><P>Hi Sandrine,</P><P></P><P>see possible implementation here...<A href="https://community.nxp.com/docs/DOC-334303">https://community.nxp.com/docs/DOC-334303</A>&nbsp;</P><P></P><P>BR, Petr</P></BODY></HTML> Wed, 03 May 2017 11:24:59 GMT PetrS 2017-05-03T11:24:59Z https://community.nxp.com/t5/MPC5xxx/IPWM-and-IPM/m-p/658862#M7164 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I'm using a MPC5646C and would like to mesure a full PWM signal <SPAN class="" lang="en"><SPAN class=""> (period + width measurement).</SPAN></SPAN></P><P>I think to assign my signal to 2 inputs : 1 IPM and 1 IPWM.</P><P>But I don't understand how to configure eMIOS and 2 channels, and acquire the information.</P><P>Do you have a simple example with only the IPM and IPWM configured for my micro.</P><P></P><P>Thank you for your help,</P><P></P><P>Sandrine</P></BODY></HTML> Tue, 02 May 2017 16:03:43 GMT https://community.nxp.com/t5/MPC5xxx/IPWM-and-IPM/m-p/658862#M7164 sandrine_labois 2017-05-02T16:03:43Z https://community.nxp.com/t5/MPC5xxx/IPWM-and-IPM/m-p/658863#M7165 <HTML><HEAD></HEAD><BODY><P>Hi Sandrine,</P><P></P><P>see possible implementation here...<A href="https://community.nxp.com/docs/DOC-334303">https://community.nxp.com/docs/DOC-334303</A>&nbsp;</P><P></P><P>BR, Petr</P></BODY></HTML> Wed, 03 May 2017 11:24:59 GMT https://community.nxp.com/t5/MPC5xxx/IPWM-and-IPM/m-p/658863#M7165 PetrS 2017-05-03T11:24:59Z