topic MPC5604E FEC & fNET in MPC5xxx

MPC5604E FEC & fNET

suhass — Tue, 24 Jan 2017 12:27:24 GMT

Hi,

I'm working on MPC5604E, using its Fast Ethernet Controller[FEC], & trying to initialize FNET stack on it, but according to "FNET Embedded TCP/IP Stack ", MPC5604E is not supported. [Refer the Image below]

Thanks & Regards

SUHAS S

Re: MPC5604E FEC & fNET

Pat — Wed, 25 Jan 2017 19:00:20 GMT

Dear Suhas,

I easily ported fNET on MPC5744P. The MCU dependent files are well identified/organized. Take a look on this thread FNET - Embedded TCP/IP Stack / FNET User Forum / FNET User Forum:Import FNET stack to MPC5748G

Once the porting completed, you can add/share your files in the fNET. Of course the new one will not be supported even if there is no change. The author can't test fNET on all platforms.

Best regards,

Pat

Re: MPC5604E FEC & fNET

martin_kovar — Mon, 30 Jan 2017 08:40:35 GMT

Hello Suhas,

From my point of view FNET stack can be used with MPC5604E, but author does not support FNET for the listed platforms anymore as Patrice mentioned above.

Regards,

Martin