topic FLASH example For MPC5606B in MPC5xxx

FLASH example For MPC5606B

曾经怀念 — Mon, 17 Oct 2016 05:55:42 GMT

hello All

I'm going to use FLASH module, but I don't know how to configure it. Who can provide me an example?

MPC5606B 144p, codewarrior10.6

thanks

Re: FLASH example For MPC5606B

lukaszadrapa — Mon, 17 Oct 2016 10:30:12 GMT

Hi,

if you want to erase/program the flash, you can use this SSD flash driver:

http://www.nxp.com/files/soft_dev_tools/software/device_drivers/MPC56XX_C90LC_JDP_SSD_100_DEVD.exe

If you want to see C code example:

https://community.nxp.com/message/592976?commentID=592976#comment-592976

Regarding configuration of flash – it is necessary to initialize PFCR0 and PFCR1 as needed. If you use CodeWarrior 10.6, the configuration is done by FlashConfig() function in __ppc_eabi_init.c file. Required number of wait states (depending on system frequency) can be found in datasheet.

Regards,

Lukas

Re: FLASH example For MPC5606B

曾经怀念 — Tue, 18 Oct 2016 10:03:34 GMT

Hi Lukas,

The information you provide is useful to me。

but the code can only run in debug mode，when I turn the power off and then on again，the program can not work

Regards

Re: FLASH example For MPC5606B

lukaszadrapa — Tue, 18 Oct 2016 13:43:00 GMT

Have you disabled the watchdog? It is automatically turned off by debugger...

void DisableWatchdog(void)
{

   SWT.SR.R = 0x0000c520;     /* Write keys to clear soft lock bit */
   SWT.SR.R = 0x0000d928;
   SWT.CR.R = 0x8000010A;     /* Clear watchdog enable (WEN) */
}

Regards,

Lukas

Re: FLASH example For MPC5606B

曾经怀念 — Wed, 19 Oct 2016 10:18:30 GMT

Hi Lukas,

Thanks a lot for your reply.

there's another problem forgot to ask you, why only HLK4~HLK7 show ????????

Regards

Re: FLASH example For MPC5606B

lukaszadrapa — Thu, 20 Oct 2016 07:42:22 GMT

Hi,

there's no memory at 0x10_0000 - 0x1F_FFFF:

Regards,

Lukas

Re: FLASH example For MPC5606B

曾经怀念 — Mon, 24 Oct 2016 03:07:13 GMT

Hi Lukas,

i'm very grateful to you for your help.

it's my fault . I found that my microcontroller reference manual is MPC5607B.

Could you shw me the C code example of emios->Input pulse width measurement mode

thanks

Re: FLASH example For MPC5606B

lukaszadrapa — Mon, 24 Oct 2016 08:22:47 GMT

Hi,

I found this one in my repository...

Lukas

Re: FLASH example For MPC5606B

曾经怀念 — Mon, 24 Oct 2016 08:48:00 GMT

Hi Lukas,

where? I can't find it!

I want to measure duty ratio ,but there is nothing return .How do i configure it ?

thanks