topic Re: My BAM(MPC5534) doesn't work well!!!!!!!! Please Help me. in MPC5xxx

My BAM(MPC5534) doesn't work well!!!!!!!! Please Help me.

wanglong — Sun, 22 Jan 2017 11:10:37 GMT

I would like to implement the BAM MPC5534A

I use a CW for MPC55xx and MPC56xx 2.9 and a MPC5534.

I have created a project using the Project Wizard feature of the Code warrior.

According to the advice of Lukas, I have edited the lcf file for __ start () function is moved to the starting address of SRAM (0x40000000).

Then I have found the problem.

Program entry address offset oxoooo0030

S705400000301A

If I have edited the lcf file for __ start () function is moved to the starting address of SRAM (0x40007000).

S705400070301A

How can I solve this problem?Lukas Zadrapa

2/5000

martin_kovar — Tue, 24 Jan 2017 14:14:32 GMT

Hello,

lukaszadrapa‌ is on vacation today. He will write you back later in this week.

Regards,

Martin

lukaszadrapa — Wed, 25 Jan 2017 09:18:04 GMT

Hi,

attached you will find project which I modified to start at 0x4000_0000. I can see in the map file that the start function begins at this address.

Regards,

Lukas

lukaszadrapa — Wed, 25 Jan 2017 09:25:18 GMT

And one more thing - be aware there are three errata related to BAM:

wanglong — Fri, 17 Feb 2017 12:31:33 GMT

thank you very much for your help

wanglong — Wed, 29 Mar 2017 11:42:39 GMT

Why is my application not running, and I'm going to set it up in the bam mode in your way

wanglong — Wed, 29 Mar 2017 12:56:20 GMT

Thank you very much