https://community.nxp.com/t5/MPC5xxx/MPC5604EEVB64-Problem/m-p/622065#M5480 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>1) Please check debugger cable and cable polarity (seems to be correct, but just to make sure).</P><P>2) Does the debugger have JP10 jumper which provides power supply? If yes, please disconnect this jumper.</P><P>3) Could you please the debugger with different board or this board with different debugger?</P><P>4) Have you ever been able to connect to the board? If yes, what did you load to memory?</P><P></P><P>Regards,</P><P>Martin</P></BODY></HTML> Mon, 24 Apr 2017 13:12:09 GMT martin_kovar 2017-04-24T13:12:09Z https://community.nxp.com/t5/MPC5xxx/MPC5604EEVB64-Problem/m-p/622064#M5479 <HTML><HEAD></HEAD><BODY><P>My board can not be properly debugged，the specific problem is described below:</P><P>After the board is powered by 12v, the status of the board is shown in the following figure</P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_1.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/7771iE616F2406C48FE1E/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_1.png" alt="pastedImage_1.png" /></span></P><P>But after connecting the &nbsp;MULTLINK, it becomes the following state,the D3 &nbsp;is on.</P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_3.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/7856i3838D7BCFDB627F7/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_3.png" alt="pastedImage_3.png" /></span></P><P>The DEBUG window is shown below</P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_4.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/8327iD80F7773357E3303/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_4.png" alt="pastedImage_4.png" /></span></P><P></P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_5.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/8371i78A0BCF6390ABBCB/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_5.png" alt="pastedImage_5.png" /></span></P><P><span class="lia-inline-image-display-wrapper" image-alt="pastedImage_6.png"><img src="https://community.nxp.com/t5/image/serverpage/image-id/8418iA5B44057556963F0/image-size/large?v=v2&amp;px=999" role="button" title="pastedImage_6.png" alt="pastedImage_6.png" /></span></P></BODY></HTML> Wed, 19 Apr 2017 06:11:46 GMT https://community.nxp.com/t5/MPC5xxx/MPC5604EEVB64-Problem/m-p/622064#M5479 yankuang1 2017-04-19T06:11:46Z https://community.nxp.com/t5/MPC5xxx/MPC5604EEVB64-Problem/m-p/622065#M5480 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>1) Please check debugger cable and cable polarity (seems to be correct, but just to make sure).</P><P>2) Does the debugger have JP10 jumper which provides power supply? If yes, please disconnect this jumper.</P><P>3) Could you please the debugger with different board or this board with different debugger?</P><P>4) Have you ever been able to connect to the board? If yes, what did you load to memory?</P><P></P><P>Regards,</P><P>Martin</P></BODY></HTML> Mon, 24 Apr 2017 13:12:09 GMT https://community.nxp.com/t5/MPC5xxx/MPC5604EEVB64-Problem/m-p/622065#M5480 martin_kovar 2017-04-24T13:12:09Z