topic MPC5748G uSDHC in MPC5xxx https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600187#M4502 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #51626f; background-color: #ffffff;">Hello! Is there any examples or documents where I can find information on how to configure and use uSDHC&nbsp;on MPC5748G?</SPAN></P></BODY></HTML> Thu, 08 Sep 2016 11:56:24 GMT yang104hong 2016-09-08T11:56:24Z MPC5748G uSDHC https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600187#M4502 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #51626f; background-color: #ffffff;">Hello! Is there any examples or documents where I can find information on how to configure and use uSDHC&nbsp;on MPC5748G?</SPAN></P></BODY></HTML> Thu, 08 Sep 2016 11:56:24 GMT https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600187#M4502 yang104hong 2016-09-08T11:56:24Z Re: MPC5748G uSDHC https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600188#M4503 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>currently there are no SW examples for uSDHC. The only description of the module can be found in the reference manual.</P><P></P><P>Regards,</P><P>Lukas</P></BODY></HTML> Fri, 02 Dec 2016 13:31:14 GMT https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600188#M4503 lukaszadrapa 2016-12-02T13:31:14Z Re: MPC5748G uSDHC https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600189#M4504 <HTML><HEAD></HEAD><BODY><P>Hello&nbsp;<SPAN style="color: #51626f; background-color: #ffffff;">Lukas,</SPAN></P><P><SPAN style="color: #51626f; background-color: #ffffff;">Would it be possible to provide a short example that will help get us started with uSDHC on MPC5748G? I'm interested in the SD 4-bit I/O mode. I would like to see how to configure the uSDHC and set up the pins (it's not clear to me how the pins that are both input and output should be configured) and then&nbsp;send commands to and receive responses from the card. Thank you!</SPAN></P><P><SPAN style="color: #51626f; background-color: #ffffff;">-- Jim</SPAN></P></BODY></HTML> Mon, 05 Dec 2016 02:16:44 GMT https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600189#M4504 jimledin 2016-12-05T02:16:44Z Re: MPC5748G uSDHC https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600190#M4505 <HTML><HEAD></HEAD><BODY><P>Hello Jim,</P><P></P><P>I have asked around if there are plans to provide drivers for uSDHC. I will let you know later...</P><P></P><P>Regards,</P><P>Lukas</P></BODY></HTML> Tue, 06 Dec 2016 06:56:00 GMT https://community.nxp.com/t5/MPC5xxx/MPC5748G-uSDHC/m-p/600190#M4505 lukaszadrapa 2016-12-06T06:56:00Z