MPC5xxxのトピックRe: AN5200 https://community.nxp.com/t5/MPC5xxx/AN5200/m-p/516913#M3408 <HTML><HEAD></HEAD><BODY><P>Please pay attention to section 7.1 of mentioned AN5200 that describes exactly what you are asking.</P></BODY></HTML> Wed, 08 Jun 2016 14:03:01 GMT davidtosenovjan 2016-06-08T14:03:01Z AN5200 https://community.nxp.com/t5/MPC5xxx/AN5200/m-p/516912#M3407 <HTML><HEAD></HEAD><BODY><P>Hi everybody,</P><P> I am trying to test non-correctable Flash ECC error reporting on an MPC5643L following guidelines of the mentioned Application Note.</P><P>After error injection, I am observing two different situation:</P><P>1) with ECSM.ECR.EPFNR set, if I try to read corrupted flash, device is reset</P><P>2) with ECSM.ECR.EPFNR not set, I am able to catch IVOR1 exception but, obviously, it is impossible to distinguish ECC error causes (RGM_FES is 0).</P><P>Has anyone encountered same problem?</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Thank you in advance,</P><P style="min-height: 8pt; padding: 0px;">&nbsp;</P><P>Andrea Mocci</P></BODY></HTML> Wed, 08 Jun 2016 13:37:05 GMT https://community.nxp.com/t5/MPC5xxx/AN5200/m-p/516912#M3407 ziomocci 2016-06-08T13:37:05Z Re: AN5200 https://community.nxp.com/t5/MPC5xxx/AN5200/m-p/516913#M3408 <HTML><HEAD></HEAD><BODY><P>Please pay attention to section 7.1 of mentioned AN5200 that describes exactly what you are asking.</P></BODY></HTML> Wed, 08 Jun 2016 14:03:01 GMT https://community.nxp.com/t5/MPC5xxx/AN5200/m-p/516913#M3408 davidtosenovjan 2016-06-08T14:03:01Z