topic Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture in MPC5xxx

Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

ricardofranca — Fri, 06 Dec 2024 11:24:25 GMT

Hello,

I am trying to use a Lauterbach probe with a MPC5777CEVB in the S32DS for Power Architecture (2.1, build ID 190624). I tried to follow the HOWTO that is available in the knowledge base (https://community.nxp.com/t5/S32-Design-Studio-Knowledge-Base/HOWTO-Install-Lauterbach-TRACE32-debugger-plug-in-into-S32/ta-p/1112237) but could not connect to the Lauterbach repository (neither http://www.lauterbach.com/eclipse nor https://repo.lauterbach.com/eclipse). I get error messages as shown in the screenshot below:

How shall I proceed to install this plugin?

Thanks,

Ricardo

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

davidtosenovjan — Mon, 09 Dec 2024 08:59:37 GMT

Have you run S32DS with administrator rights?

davidtosenovjan_0-1733734729586.png

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

ricardofranca — Thu, 12 Dec 2024 12:47:02 GMT

Hello David,

I ran it with and without administrator rights and I got the same error messages. Is there any other way to install the plugin?

Besides: does it require a TRACE32 license to work or having the probe is enough?

Thanks,

Ricardo

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

davidtosenovjan — Thu, 12 Dec 2024 14:08:31 GMT

I have been advice to replace http:// by https://

It could help.

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

ricardofranca — Tue, 17 Dec 2024 15:29:47 GMT

Hello,

https did not help, either. In fact, I get those error messages from any site of the provided list...

Thanks,

Ricardo

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

davidtosenovjan — Tue, 17 Dec 2024 16:00:15 GMT

According similar threads dealing with this topic this could be potentially caused by Firewall settings/company policy. It looks that something is blocking the connection.

I would recommend to consult with your IT department.

Alternatively you could ask Lauterbach to provide offline installation package:
https://www.lauterbach.com/support-and-training/support

Re: Problems when trying to install Lauterbach probe plugin for S32DS for Power architecture

ricardofranca — Thu, 19 Dec 2024 10:47:01 GMT

Hi David,

As altering company policies is well beyond my reach, I will contact Lauterbach support. Thanks!

Ricardo