MPC5xxx中的主题 Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

Yorn — Thu, 05 Sep 2024 03:04:24 GMT

PE Driver(multilink_universal_install_12.2 ) can use on CodeWarrior 2.1 IDE ,but it can not use on the CodeWarrior 10.7, it must instatll 12.7. Is PE Driver can used on the both CodeWarrior 2.1 IDE and CodeWarrior 10.7 IDE?

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

petervlna — Thu, 05 Sep 2024 07:04:35 GMT

Hello,

@stanish could you comment here?

Best regards,

Peter

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

stanish — Mon, 09 Sep 2024 12:54:07 GMT

Hi,

I've just installed Drivers 12_7 on my Windows 10 64bit machine and use it with CodeWarrior for MPC55xx/56xx v2.10 and

PEmicro Multilink FX (black probe) rev.C
PEmicro Multilink PowerPC Nexus (blue probe) rev.

stanish_0-1725886325651.png

All configurations work as expected.

Do you observe any issue on your side?

If yes, can you attach the error screenshot?

Hope it helps.

Stan

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

Yorn — Tue, 10 Sep 2024 01:06:22 GMT

Hi,Thank you for your replying. My window is Windows 11 64bit , My drive and PE type is as following figure

Yorn_0-1725928745017.png

Yorn_2-1725929907851.png

When debuging on CodeWarrior 2.10 using multilink_universal_install _12.7. It is not ok,

Yorn_3-1725930239613.png

When debuging on CodeWarrior 2.10 using multilink_universal_install _12.0. It is ok,

Yorn_4-1725930353288.png

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

stanish — Wed, 11 Sep 2024 10:39:52 GMT

Can you try to install P&E patch available here:

https://www.pemicro.com/downloads/download_file.cfm?download_id=463

This should update the support for all compatible PEmicro interfaces into CW MPC55xx/56xx v2.10

Stan

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

Yorn — Thu, 12 Sep 2024 01:02:57 GMT

Thank you for your replying

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

ZhaoDinan — Fri, 11 Oct 2024 08:50:19 GMT

ZhaoDinan_0-1728636156338.png

Thank you, I solved the PEmicro recognition problem using the method above, but now I'm encountering the "load fail" issue.

when I clicked the "connect(Reset)"button ,the new problem was appeared as below. And how can I solve this problem ?(load aborted)

ZhaoDinan_1-1728636195461.png

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

Yorn — Fri, 11 Oct 2024 09:17:47 GMT

IT is not found elf.file ,reload the elf file to the path

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

ZhaoDinan — Sat, 12 Oct 2024 07:41:51 GMT

Thank you!

Re: CodeWarrior 2.1 and CodeWarrior 10.6 PE Driver

ArunMukundan — Thu, 05 Dec 2024 08:03:02 GMT

Hi,

Could you please help me to resolve this error.

ArunMukundan_0-1733385722303.png

PFB is me driver details

ArunMukundan_1-1733385776134.png

The USB indication led is turned on and it is blue color.

Still the software is not detecting the hardware.