https://community.nxp.com/t5/MPC5xxx/Request-for-Documentation-on-Enabling-Lockstep-Feature-in/m-p/1654827#M23652 <P>Dear NXP Support Team,</P><P><SPAN>I am currently working on a Battery Management System (BMS) project and using the RD33771 EVB (</SPAN><A href="https://www.nxp.com/design/designs/rd33771-48vevm-reference-design:RD33771-48VEVM" target="_new">https://www.nxp.com/design/designs/rd33771-48vevm-reference-design:RD33771-48VEVM</A><SPAN>) along with the development software provided by NXP for development purposes.</SPAN> This board is equipped with the <STRONG>MPC5744P</STRONG> microcontroller, which supports the <STRONG>lockstep</STRONG> feature.</P><P>I would greatly appreciate your assistance in providing me with detailed documentation regarding the enabling of the lockstep feature on the MPC5744P MCU. Specifically, I am looking for information on the configuration steps and options necessary to enable lockstep mode in the S32 Design Studio IDE for this particular microcontroller.</P><P>I have searched extensively on the NXP website for the required documentation but have been unable to locate the specific information I need. Therefore, I kindly request your support in directing me to the appropriate documentation or providing any relevant resources that will guide me through the process of enabling lockstep on the MPC5744P MCU.</P><P>Any assistance you can provide would be highly appreciated, as it will greatly contribute to the successful implementation of my BMS project.</P><P>Thank you very much for your attention to this matter.&nbsp;</P><P>&nbsp;</P> Mon, 22 May 2023 12:29:11 GMT AVBMS 2023-05-22T12:29:11Z https://community.nxp.com/t5/MPC5xxx/Request-for-Documentation-on-Enabling-Lockstep-Feature-in/m-p/1654827#M23652 <P>Dear NXP Support Team,</P><P><SPAN>I am currently working on a Battery Management System (BMS) project and using the RD33771 EVB (</SPAN><A href="https://www.nxp.com/design/designs/rd33771-48vevm-reference-design:RD33771-48VEVM" target="_new">https://www.nxp.com/design/designs/rd33771-48vevm-reference-design:RD33771-48VEVM</A><SPAN>) along with the development software provided by NXP for development purposes.</SPAN> This board is equipped with the <STRONG>MPC5744P</STRONG> microcontroller, which supports the <STRONG>lockstep</STRONG> feature.</P><P>I would greatly appreciate your assistance in providing me with detailed documentation regarding the enabling of the lockstep feature on the MPC5744P MCU. Specifically, I am looking for information on the configuration steps and options necessary to enable lockstep mode in the S32 Design Studio IDE for this particular microcontroller.</P><P>I have searched extensively on the NXP website for the required documentation but have been unable to locate the specific information I need. Therefore, I kindly request your support in directing me to the appropriate documentation or providing any relevant resources that will guide me through the process of enabling lockstep on the MPC5744P MCU.</P><P>Any assistance you can provide would be highly appreciated, as it will greatly contribute to the successful implementation of my BMS project.</P><P>Thank you very much for your attention to this matter.&nbsp;</P><P>&nbsp;</P> Mon, 22 May 2023 12:29:11 GMT https://community.nxp.com/t5/MPC5xxx/Request-for-Documentation-on-Enabling-Lockstep-Feature-in/m-p/1654827#M23652 AVBMS 2023-05-22T12:29:11Z https://community.nxp.com/t5/MPC5xxx/Request-for-Documentation-on-Enabling-Lockstep-Feature-in/m-p/1654880#M23657 <P>It is not necessary to enable anything as "lockstep" is the only configuration of MPC5744P.</P> <P>MPC5744P is a dual core processor whose cores always run in lockstep. Decoupled mode is not supported by this device.</P> <P>&nbsp;</P> Mon, 22 May 2023 13:35:24 GMT https://community.nxp.com/t5/MPC5xxx/Request-for-Documentation-on-Enabling-Lockstep-Feature-in/m-p/1654880#M23657 davidtosenovjan 2023-05-22T13:35:24Z