Summary of differences between MPC5748G cut 1 and cut 2 available?

mbu2015 — Mon, 14 Dec 2015 15:41:01 GMT

Hello All,

I have some trouble using the MPC5748G cut 1 silicon on our evaboard in combination with the current reference manual rev.4 07/2015.

Is there a complete list of differences available (or one of the older reference manuals matching the cut 1 content)?

The things I came cross already (taking up half a week already):

1.) Bootheaders at 0x00FC_0000 and above do not exist

2.) MC_CGM_AC5_SC is located at a completely different address

3.) MC_ME_PS2 does not have a bit for SIUL in cut 2 obviously look at the Lauterbach configuration (and now I don't know how to activate SIUL in cut 1, which most likely prevents me from even switching on an LED on the evaboard)

With best regards

Matthias Busch

Re: Summary of differences between MPC5748G cut 1 and cut 2 available?

lukaszadrapa — Tue, 22 Dec 2015 12:02:37 GMT

Hi,

much easiest way is to get cut 2 silicon:

MPC5748G|32-bit MCU|Gateway|NXP

A lot of changes were done and it is not possible to say that older versions of reference manual fit exactly only the cut 1 because also other parts of RM have been updated (not related to cut version). Cut 1 is just engineering sample and it is not intended for production.

Regards,

Lukas

MPC5xxx中的主题 Re: Summary of differences between MPC5748G cut 1 and cut 2 available?

Summary of differences between MPC5748G cut 1 and cut 2 available?

Re: Summary of differences between MPC5748G cut 1 and cut 2 available?