topic Re: MQX USB host initialization error in MPC5xxx

MQX USB host initialization error

wwj — Mon, 25 Apr 2022 09:15:21 GMT

usb_error = _usb_host_driver_install(USBCFG_DEFAULT_HOST_CONTROLLER);

usb_error = _usb_host_init(USBCFG_DEFAULT_HOST_CONTROLLER, &host_handle);

The OS I am using is MQX3.6, I am getting an error when compiling the above code, I don't know what to ask? How to modify it?

Re: MQX USB host initialization error

danielchen — Tue, 26 Apr 2022 08:23:01 GMT

MQX 3.6 is a very old MQX version, release by Embedded Access.

If you only have a compile issue, I would suggest you check the supported IDE version in the release note. If you build MQX 3.6 with the latest IDE version, maybe will result in compile errors.

I would suggest you contact Embedded Access through below link

https://embedded-access.com/support-services/

Regards

Daniel

Re: MQX USB host initialization error

wwj — Tue, 02 Aug 2022 09:06:37 GMT

Re: MQX USB host initialization error

wwj — Tue, 02 Aug 2022 09:09:18 GMT

I need to use SonarQube software static Code analysis for the firmware in Code Warrior7.2 IDE, how to do it?