topic How to configure the PIT clock source by clock manager? in MPC5xxx

How to configure the PIT clock source by clock manager?

Hanry — Wed, 16 Mar 2022 04:33:48 GMT

Question description

When I add the PIT component to the can_pal_MPc5748g routine, a warning pops up in the PIT component configuration: “Please configure the PIT clock source by clock manager!”. How to configure the PIT clock source by clock manager?

Thank you for your help.

Re: How to configure the PIT clock source by clock manager?

petervlna — Wed, 16 Mar 2022 06:00:20 GMT

Hello,

As the warning says, you have to enable clock for PIT in clock manager.

So go into clock manager:

And enable/configure PIT clock

Best regards,

Peter

Re: How to configure the PIT clock source by clock manager?

Hanry — Thu, 17 Mar 2022 02:54:07 GMT

Thanks for your direction. I have configured it. But the problem still exists.

Re: How to configure the PIT clock source by clock manager?

petervlna — Thu, 24 Mar 2022 08:31:35 GMT

Hello,

hmm, not sure where is the issue here.

Could you share the project? Or if you used example project tell me which one and I will try to add the PIT to it.

Best regards,

Peter

Re: How to configure the PIT clock source by clock manager?

Hanry — Wed, 06 Apr 2022 07:33:20 GMT

The program is attached below.

Thank you for your help.