topic Re: DCU3 Setup instructions for PXD20 / MPC5645S in MPC5xxx

DCU3 Setup instructions for PXD20 / MPC5645S

peteradamcik — Tue, 24 Aug 2021 05:54:06 GMT

Hi Guys, I'm setting up the DCU3 graphics display and almost ready to start setting up the registers in Assembler.

Before I start, is there a seperate .PDF to explain step by step to setup the DCU3 or any other info to help me set it up and run.

I already have the PXD20 reference manual which shows me the registers for the DCU3 but not actually to setup a 640x480@60Hz display.

Any help would be very much appreciated.

Thanks guys, hope to hear from you soon.

Pete.

Re: DCU3 Setup instructions for PXD20 / MPC5645S

davidtosenovjan — Tue, 24 Aug 2021 07:40:28 GMT

Hi, please create new case (according procedure below) with reference to this thread.

https://www.nxp.com/video/tutorial-for-nxp-support-case-portal:NCP-VIDEO

I can send you some example codes and presentation slides. Thanks for understanding

Re: DCU3 Setup instructions for PXD20 / MPC5645S

peteradamcik — Tue, 24 Aug 2021 23:38:31 GMT

Hi David, thank you for the link. Oh, YES please send me some code and presentation slides.

Much appreciated David

Pete

Re: DCU3 Setup instructions for PXD20 / MPC5645S

peteradamcik — Tue, 24 Aug 2021 23:43:30 GMT

Hi David, I just tried to get a ticket for support and I received this error:

An unhandled fault has occurred in this flow
An unhandled fault has occurred while processing the flow. Please contact your system administrator for more information.

I guess the ticket page is down.

Pete