MPC5606B UART - Receive Interrupt

anithaa — Mon, 07 Dec 2015 05:01:53 GMT

Hello,

How we can transmit and receive 20 character based on interrupt in MPC5606B through UART.

Should i disable RXEN after receiving each message. Please share the sample code. Please suggest me how i can write ISR and how i can process the DATA in my application.

Below are the details:

Linflex2-UART mode

Baud Rate - 9600 , 8 bit data no parity

Receive interrupt Enabled,

Transmit interrupt Disabled

TDFL=00, RDFL=00(1Byte),

Thanks & Regards

Anitha

Re: MPC5606B UART - Receive Interrupt

martin_kovar — Mon, 07 Dec 2015 13:59:00 GMT

Hi Anitha,

I have just created simple example, which you can use. The example show how to send data using interrupt and also receive data using interrupt. Of course you can write your own interrupt handlers. The code which I used, serves only for demonstration how the interrupt handlers could be used. If you have any question about example, feel free to write me back.

Regards,

Martin

topic MPC5606B UART - Receive Interrupt in MPC5xxx

MPC5606B UART - Receive Interrupt

Re: MPC5606B UART - Receive Interrupt