topic Re: CANFD payload 64 byte IFLAG asserted question in MPC5xxx

CANFD payload 64 byte IFLAG asserted question

yijie_chan — Tue, 04 Jun 2019 09:37:11 GMT

If the CAN message buffer payload is set to 8bytes, the corresponding flag of the IFLAG register will be set after the message is sent or received.If payload is set to 16Byte or 32Byte or 64Byte, i found that the IFLAG is either not be set up or set up wrongly. I would like to understand under such circumstance, how to get the flag or how to understand the status of the IFALG register.

Re: CANFD payload 64 byte IFLAG asserted question

jiri_kral — Wed, 05 Jun 2019 05:32:40 GMT

Hi,

what's your MCU?

Jiri

Re: CANFD payload 64 byte IFLAG asserted question

yijie_chan — Wed, 05 Jun 2019 06:21:44 GMT

Hi~ jiri

The MCU is S32R274.

Re: CANFD payload 64 byte IFLAG asserted question

PetrS — Tue, 11 Jun 2019 08:32:46 GMT

Hi,

MB flag is set when message is successfully sent or received, regardless of payload.

What did you mean by "flag is set up wrongly"?

How do you manage the MBs for payload of 16/32/64 bytes? Note the MB's address offset changes for different payload in memory block, depending of MBDSRn setting. Tables 53-15 to 53-17 summarizes this.

BR, Petr

Re: CANFD payload 64 byte IFLAG asserted question

yijie_chan — Fri, 14 Jun 2019 07:29:54 GMT

Hi，petr.

you are correct! i didn't notice the offset of ram memory of CAN ,now i can sent and receive message using payload of 64 bytes.