MPC5xxxのトピックAbout SPC5603B CensorShip Configuration Issues

About SPC5603B CensorShip Configuration Issues

chenyu1 — Tue, 19 Mar 2019 09:18:04 GMT

My client uses the SPC5603B to configure the CensorShip and configure it according to the configuration file provided by the Community. After the configuration is successful, the correct password is entered, the connection cannot be made, the program cannot be downloaded, and the error in the picture is displayed. Customers doing the same thing on CodeWarrior 2.1 and CodeWarrior 10.6 IDEs are not successful.Could you help me to see what the problem is?

Re: About SPC5603B CensorShip Configuration Issues

davidtosenovjan — Tue, 19 Mar 2019 12:56:59 GMT

Hi, for this I have example code here:

Example MPC5604B Censorship CW210

Looking to your description, you apparently omitted censorship password must be entered in reverse oreder i.e. in you case 0x89ABCDEF12345678

Hope it helps

Re: About SPC5603B CensorShip Configuration Issues

chenyu1 — Tue, 26 Mar 2019 03:09:56 GMT

Thanks for your reply.The customer tried to enter the password in reverse order, but the same error occurred before.The figure is the interface where the customer password is set successfully.

Re: About SPC5603B CensorShip Configuration Issues

davidtosenovjan — Tue, 26 Mar 2019 09:34:09 GMT

I don't see any obvious error. Have they tried my example codes?