MPC5xxxのトピックRe: How to use eTPU in MPC5746R

How to use eTPU in MPC5746R

flyskyr丶 — Wed, 15 Aug 2018 02:37:01 GMT

After had browsed many websites , I still don't understand eTPU.

Just got a way to use that, like the website, "eTPU Function Selector - NXP "

Can you tell me a way to use eTPU by my code instead of the library, like using Xgate in S12X.

Thanks!

Re: How to use eTPU in MPC5746R

jamesmurray — Thu, 16 Aug 2018 22:57:46 GMT

Yes, it can be done.

But first you'll need to buy or write a compiler or assembler for the eTPU code.

Then read, read and re-read the eTPU section of the Reference Manual Addendum.

James

Re: How to use eTPU in MPC5746R

davidtosenovjan — Mon, 20 Aug 2018 08:32:57 GMT

eTPU is an complex I/O co-processor. You can use it two ways:

1) with using of eTPU functions prepared by NXP

2) to create your own function or modify NXP’s function

Ad 1)

For using eTPU functions pre-prepared by NXP (the ones you can download by eTPU Function Selector) without modification you don’t need any eTPU compiler. See

http://www.nxp.com/webapp/etpu/

Also there is some new version, currently containing only some functions:

http://www.nxp.com/webapp/etpu_cw/

Only download them, configure by eTPU graphical configuration tool (GCT), include all needed files to CodeWarrior or other compiler and use it.

GCT is the tool which is intended to configure most of functions prepared by NXP that can be downloaded as a pack here:

http://www.nxp.com/webapp/sps/download/license.jsp?colCode=ETPUGCT&Parent_nodeId=1311258915317726989428&Parent_pageType=product

Here you can example procedure how to use eTPU PWM function, step by step:

http://www.nxp.com/files/soft_dev_tools/doc/app_note/AN4687.pdf

Every eTPU FUNCTION has its own descriptive documents (application note), its software attachment usually contains some simple example code:

http://www.nxp.com/products/automotive-products/microcontrollers-and-processors/32-bit-power-architecture/ultra-reliable-mpc56xx-32-bit-automotive-industrial-microcontrollers-mcus/enhanced-time-processor-unit:eTPU?tab=Documentation_Tab

Ad 2)

If you cannot fit our existing eTPU function to your application you can write your own function or modify the existing one you will need eTPU compiler and simulator.

Currently there are 2 options (preferred solution is no.1):

1) Ashware solution (compiler + simulator)

https://www.ashware.com/etpu2-simulators

2) NXP eTPU2 Development Suite (compiler + simulator)

http://www.nxp.com/products/automotive-products/microcontrollers-and-processors/32-bit-power-architecture/ultra-reliable-mpc56xx-32-bit-automotive-industrial-microcontrollers-mcus/codewarrior-development-studio-for-etpu-v10.3:eTPU2

Buying of following book could be good start point for developing you own eTPU function or library:

https://www.ashware.com/etpu-programming-made-easy-book

Re: How to use eTPU in MPC5746R

flyskyr丶 — Fri, 24 Aug 2018 02:41:39 GMT

I have tried the ad1 above. Now I can using a little function, but also get some problem.

1) when using pwm function:

configuration1 :

can be used.

configuration2 :

can not be used. I check port configuration, no problem ....

Why? I guess it's too long for configuration ? No...This is impossible.

2)When using FPM function:

In main:

Not work , It run in the while loop. I'm using MPC5746R, and then check the file "mpc5746r_vars.h".

find :

can you tell me this address was right or not ?

Looking forward to your reply !

Thank you.

Re: How to use eTPU in MPC5746R

flyskyr丶 — Fri, 24 Aug 2018 02:53:58 GMT

Thanks for your reply !

I just use it simply, not so complicated.

~_'