Motor Control and Smart Energy中的主题 Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

Does model based design tool support MPC5643L 3-phase PMSM Development Kit

TLin3 — Wed, 08 Feb 2023 08:55:36 GMT

Hi

I am planning to purchase the MTRCKTDPS5643L motor control development kit for dual-motors (PMSM) application.

Before placing an order, just would like to understand if this DevKit could work with MathWorks/Simulink ASW development or only design for C-source code development.

I have been searching for it, but still unclear.

Some information on the MathWorks hardware support website (Model Based Design Toolbox), it does not mention anything for this DevKit.

Thanks

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

KalaimaniArumugamdev — Tue, 07 Feb 2023 17:26:33 GMT

Hi @TLin3

Please refer this link for nxp supporting mcu via mathlab: https://in.mathworks.com/hardware-support/nxp.html

Most of the MCU listed in this site is working.

For your kit embedded coder and support pakage are available.

Thank

Kalaimani Arumugam

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

TLin3 — Wed, 08 Feb 2023 08:52:03 GMT

Hi Kalaimani Arumugam,

Thanks for your reply.

Sorry, I should have explained my question clearly, and you are correct that MATLAB Coder, Simulink Coder, and Embedded Coder and support packages are available

However, NXP Model-Based Design Toolbox support seems not to include MPC56xx?

Thanks

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

petervlna — Wed, 08 Feb 2023 08:56:21 GMT

Hello,

I do not see it is supporting the SPC5643L device at all.

Here is the list of supported MPC5xxx

Secondly I would not use old devices like SPC5643L for new designs.

I recommend to use at least SPC574xP or the latest motor control replacement S32K396 device. Since those has a lot of support tools and will make your development easier.

Best regards,

Peter

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

TLin3 — Wed, 08 Feb 2023 09:32:14 GMT

Hi Peter,

Thanks for your reply.

Understood. I will search for it.

Thanks

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

petervlna — Wed, 08 Feb 2023 10:17:17 GMT

Hello,

Yes that would be the case. As the MDBT came in time when MPC56xx where already replaced by MPC57xx.

best regards,

Peter

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

TLin3 — Wed, 08 Feb 2023 10:48:16 GMT

Hi Peter @petervlna ,

Would you know if there is any NXP DevKit for dual-motor control applications other than MTRCKTDPS5643L motor control DevKit, please?

I am trying to find it, but no luck.

Is it possible to build one custom-made DevKit?

Thanks

Re: Does model based design tool support MPC5643L 3-phase PMSM Development Kit

petervlna — Fri, 10 Feb 2023 10:18:41 GMT

Hello,

No, we currently does not have.

There will be one at end of 2023 released based on S32K396.

Best regards,

Peter