topic Re: VScode debugging app on flash not working in MCUXpresso for VSCode

VScode debugging app on flash not working

arunkumar_g — Thu, 31 Oct 2024 20:31:03 GMT

Hello,

I was able to build the hello world app and when tried to deploy to 1189EVK, it does not work. The debugger starts up and shows as 'running' and does not break at main() nor cannot be stopped. Console does not print anything.

I have tried flash erase via ".\LinkServer.exe flash MIMXRT1189xxxxx:MIMXRT1180-EVK erase", installing and re-installing mcu usb drivers , reinstalling mcuxpresso plugin etc.

Attached is the debugger log with engine logging.

What could I try next?

Thanks

Re: VScode debugging app on flash not working

Harry_Zhang — Fri, 01 Nov 2024 10:16:50 GMT

Hi @arunkumar_g

Can this example work？

Hang

Re: VScode debugging app on flash not working

DragosMiloiu — Fri, 01 Nov 2024 10:38:05 GMT

Hello @arunkumar_g,

Please try the following steps:

- Erase flash (right click on the project and select "Erase Flash"). Once the operation is completed it will show a message that it was successful.

- Flash the application (from QuickStart panel->Flash Programmer-> Select project-> Run)

- Debug (it may stop at reset handler; if yes, please issue continue command to reach "main")

Regards,

Dragos.