topic Re: Debugging MCUXpresso project with VSCode in MCUXpresso for VSCode

Debugging MCUXpresso project with VSCode

Kateb — Fri, 03 Nov 2023 13:04:31 GMT

After successfully importing mcuxpresso project to vscode, I got this error message :

Could not read settings from mcuxpresso-tools.json for project

Thanks for the help.

Re: Debugging MCUXpresso project with VSCode

ZhangJennie — Mon, 06 Nov 2023 03:34:26 GMT

Hi Kateb

In order to resolve your issue, please provide us more informations

1. steps of how to reproduce this issue

2. your part number, thus we can assign the question to the right engineer in charge.

Thanks,

Jun Zhang

Re: Debugging MCUXpresso project with VSCode

Kateb — Fri, 17 Nov 2023 14:29:53 GMT

Hi Jun,

Thanks for the response.

I imported the NXP MCU example "kw45b41zevk_digital_key_device_freertos" into VSCode using Import Project from folder. MCUxpresso for VScode generated some files Launch.json, cmake-kits.json, cmake-variants.json, settings.json, mcuxpresso-tools.json.

When I press F5, VSCode displays the message below:

Could not read settings from mcuxpresso-tools.json for project "c:\_dev\digital_key_device-vscode\kw45b41zevk_digital_key_device_freertos"

Here is the content of mcuxpresso-tools.json:

{

"version": "1.1",

"toolchainPath": "C:\\Users\\kghemari\\.mcuxpressotools\\arm-gnu-toolchain-12.2.rel1-mingw-w64-i686-arm-none-eabi",

"toolchainVersion": "",

"linkedProjects": [],

"trustZoneType": "none",

"multicoreType": "none",

"debug": {

"linkserver": {},

"pemicro": {},

"segger": {}

"projectType": "sdk-freestanding",

"sdk": {

"version": "",

"boardId": "kw45b41zevk",

"manifestId": "",

"deviceId": "KW45B41Z83xxxA",

"coreId": "cm33_KW45B41Z83xxxA"

}

Regards,

Kateb

Re: Debugging MCUXpresso project with VSCode

Alice_Yang — Thu, 23 Nov 2023 02:03:18 GMT

Hello @Kateb

How about import a simple SDK project?

All have the same issue or just only this project?

Alice

Re: Debugging MCUXpresso project with VSCode

Kateb — Thu, 14 Dec 2023 14:53:57 GMT

Thank you ...I'll get back to you as soon as I'll give it retry. For now I"m on another assignment.

Re: Debugging MCUXpresso project with VSCode

cristiantepus — Tue, 09 Jan 2024 09:56:57 GMT

Hi,

I still don't understand how to reproduce the problem, from what I see, this SDK does not have arm-gcc type support so cannot be used under vscode extension.

Similar, KW45 is not available under github.

Consequently, SDK examples will not compile.

So, can you detail how you imported the project? From an SDK? Or from MCUXpresso IDE? And how did you used a potential SDK that you have?