topic How to debug MCUXpresso-for-VSCode firmware using opensource CMSIS-DAP(DAPlink) probe? in MCUXpresso for VSCode

How to debug MCUXpresso-for-VSCode firmware using opensource CMSIS-DAP(DAPlink) probe?

Ahmadh — Wed, 08 Nov 2023 10:10:32 GMT

I'm using MCUXpresso-for-VSCode to build i.mxrt MCU firmware and want debug using an opensource DAPLink (CMSIS-DAP) probe.

In the MCUXpresso-for-VSCode factsheet CMSIS-DAP is mentioned is the Figure along with segger/linkserver/PE. but in the vscode plugin there is no CMSIS-DAP.

So, Can I use vscode plugin with opensource DAPLink(CMSIS-DAP) opensource debug probe?

Re: How to debug MCUXpresso-for-VSCode firmware using opensource CMSIS-DAP(DAPlink) probe?

Pavel_Hernandez — Wed, 08 Nov 2023 17:43:26 GMT

Hello @Ahmadh

Could you tell us what is the part number SDK version, and VsCode version are you using?

Best regards

Re: How to debug MCUXpresso-for-VSCode firmware using opensource CMSIS-DAP(DAPlink) probe?

Ahmadh — Thu, 09 Nov 2023 11:47:24 GMT

Hi,

I'm using Vscode V1.84.1 and mimxrt1015 SDK version 2.13

Re: How to debug MCUXpresso-for-VSCode firmware using opensource CMSIS-DAP(DAPlink) probe?

kerryzhou — Fri, 10 Nov 2023 02:28:05 GMT

Hi @Ahmadh ,

You create a similar post in the RT forum, please check that reply in your another post:

https://community.nxp.com/t5/i-MX-RT/How-to-debug-MCUXpresso-for-VScode-application-with-daplink/td-p/1754107

Any updated information, just update the post, thanks.

BTW, your RT1015 SDK is a little old, you can use the new SDK2.14.0:

https://mcuxpresso.nxp.com/en/builder?hw=EVK-MIMXRT1015

Wish it helps you!

Best Regards,

Kerry