FRDM K64F - OUTPUT

kofikofi — Sat, 09 Dec 2017 01:02:54 GMT

Am using P& E Micro bootloader for K64F and that gets me to communicate with the board. Great !!!

PLEASE HAVE A LOOK AT THE ATTACHMENT...

Now the output to my serial terminal emulator (Putty ) does not make sense. Am running a basic "Hello, world " demo and can't get any meaningful print out tho the MCUexpresso console shows the correct output.

How do I fix this... by the way I have tried Tera Term emulator and its the same bad outcome.

Kofi

Re: FRDM K64F - OUTPUT

ZhangJennie — Mon, 18 Dec 2017 09:52:22 GMT

Hi,

I just tested hello_world SDK demo, PRINTF can print to UART console without problem.

Make sure you enable uart console

make sure the serial terminal with the following settings:
    - 115200 baud rate
    - 8 data bits
    - No parity
    - One stop bit
    - No flow control

Have a great day,
Jennie Zhang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

MCUXpresso SDKのトピックRe: FRDM K64F - OUTPUT

FRDM K64F - OUTPUT

Re: FRDM K64F - OUTPUT