MCUXpresso SDK中的主题 LPUART0 Configuration

LPUART0 Configuration

pciampanelli — Fri, 09 Dec 2022 15:18:26 GMT

Hi,

I'm using freedom development board FRDM-K32L2A4S.

Using MCUXpresso IDE v11.6.1 i created my own test project to be uploaded on the board.

I'm trying to use LPUART0, so I configured it in polling mode, 115200 8N1, tx and rx enabled.

Using pinmux tool i selected GPIO A14 as TX and GPIO A15 as RX.

I generated the code and I tried to send a char with:

LPUART_WriteByte(LPUART0_PERIPHERAL, 'J');

but nothing seems to come out of GPIO A14.

Any hint on how to make it work?

thanks

Paolo

CarlosGarabito — Tue, 13 Dec 2022 13:19:40 GMT

Hi @pciampanelli, You can use the example as a reference to check how is the code and the pins' connection,

As you can see in the pictures below

By other hand, if you have a project and want to add the lpuart, you can use the manager SDK components

And select the pins components