topic Re: LPSPI Baud Rate Change in MCUXpresso SDK

LPSPI Baud Rate Change

jeffthompson — Tue, 10 Sep 2019 12:00:39 GMT

I initially configure my SPI device at at a baud rate of 10 MHz. Following that, it's able to run at 30 MHz, so I get a copy of masterConfig by calling LPSPI_MasterGetDefaultConfig, change the baudRate member of the copy to 30000000, and then call LPSPI_MasterInit, passing it the LPSPI peripheral's base address, the modified copy of masterConfig, and the LPSPI clock frequency. I got the base address and clock frequency from peripherals.h, and they match the settings I chose using MCUXpresso ConfigTools Peripherals tools. However, the baud rate does not change. What else do I need to do?

Re: LPSPI Baud Rate Change

nxf45548 — Tue, 10 Sep 2019 21:13:45 GMT

Can you please provide us the part number of the product that you are using?

Re: LPSPI Baud Rate Change

jeffthompson — Wed, 11 Sep 2019 11:21:33 GMT

MIMXRT1062DVL6A

Found the problem. Before calling LPSPI_MasterInit, I had to call LPSPI_Enable( base, false ) to disable the peripheral first. The MasterInit call enables it automatically.