MCUXpresso IDE中的主题 Re: debugging issue

debugging issue

yosri_c — Thu, 20 Jun 2024 09:15:21 GMT

hello NXP ,

we're currently working on a project using a custom iMX RT1176 (CM7 master / CM4/ slave) with the memory map attached below , the issue is when building for release we face no problem , but when we try to run a debugging session , the CM7 loads fine but the slave core wouldn't it through a hardfault

we're not sure wether it's an memory mismatch or a debugger problem or one might suspect a flashing algorithm issue via PEmicro Multilink for flash programming

Re: debugging issue

Harry_Zhang — Tue, 25 Jun 2024 10:20:30 GMT

Hi @yosri_c

Compare this image with the picture you sent.

There is no problem with the memory address, so it my be debugger problem or one might suspect a flashing algorithm issue via PEmicro Multilink for flash programming.

Hope this will help you.

Hang

Re: debugging issue

yosri_c — Tue, 25 Jun 2024 14:07:37 GMT

hi there @Harry_Zhang

Thanks for the update , althought i want to believe it's a problem with debugger or flashing algorithm , i can't because i tried building and debugging with MCUxpresso version 11.6 and both cores loads correctly and i get the debugging interface and the adresses and the entry points , so the boot process is correct like you showed , with IDE v 11.9 i get this

Re: debugging issue

Harry_Zhang — Thu, 27 Jun 2024 03:07:52 GMT

Hi @yosri_c

Do you mean that MCUxpresso version 11.6 can work while MCUxpresso version 11.9 cannot?

Hang

Re: debugging issue

yosri_c — Thu, 27 Jun 2024 11:54:42 GMT

hi @Harry_Zhang

Yes , that's what it looks like happening !

Re: debugging issue

Harry_Zhang — Wed, 03 Jul 2024 08:39:47 GMT

Hi @yosri_c

I'm sorry, I tested MCUxpresso version 11.6 and MCUxpresso version 11.9 on imxrt1170evkb board,

they can work successfully.

I did not reproduce this issue.

Hang

Re: debugging issue

KKR231 — Thu, 04 Jul 2024 09:17:48 GMT

Go to project explorer and select project, now go to project setting and select memory and right click on memory and edit it. and in that select flash driver.