topic Re: Target reported errors in MCUXpresso IDE

Target reported errors

Prudhvi_Raj — Wed, 12 Jun 2024 13:14:16 GMT

Tried to debug sdk by MCUXpresso IDE ,occuring a error such as target reported errors .provide solution as soon as possible.

Refer to the attachment.

Re: Target reported errors

Harry_Zhang — Thu, 13 Jun 2024 03:02:53 GMT

Hi @Prudhvi_Raj

According to the picture, this error is due to not connecting to the core.

So please check if this board is powered on and if it is connected to the debug port.

Hope this will help you.

Hang

Re: Target reported errors

Prudhvi_Raj — Thu, 13 Jun 2024 05:38:10 GMT

Hi @Harry_Zhang

The board is powered by debug port and tried to debug, still i am getting the same error same as earlier.

Re: Target reported errors

Harry_Zhang — Thu, 13 Jun 2024 08:27:27 GMT

Hi @Prudhvi_Raj

I tested my board,

It can work.

I watched your error message,

It reported that the wire not connected,

So can you change another wire?

Hang

Re: Target reported errors

Harry_Zhang — Thu, 13 Jun 2024 09:49:50 GMT

Hi @Prudhvi_Raj

On another board, i reproduced this issue.

When i changed to jlink.

It can work.

Hope this will help you.

Hang