topic Re: IMXRT1010 vector table address in MCUXpresso IDE

IMXRT1010 vector table address

LuigiV — Wed, 20 Dec 2023 16:28:14 GMT

I'm developing a project using the IMXRT1010 SDK and the MCUXpresso IDE, is there a way to know the address where it locates the interrupt vector table ?

Thank you

Luigi

Re: IMXRT1010 vector table address

pandi — Sat, 23 Dec 2023 12:00:44 GMT

Hi,check the cortex manual of your controller there will be a seperate section for vector table there you can find the address of vector table

Regards,

Pandi

回复： IMXRT1010 vector table address

Gavin_Jia — Mon, 25 Dec 2023 07:28:52 GMT

Hi @LuigiV ,

You can check the linker script file after build. Or confirm the address by looking at the registers.

uint32_t vtor = SCB->VTOR; PRINTF("The vector table address is 0x%x\r\n", vtor);

Best regards,

Gavin

回复： IMXRT1010 vector table address

lpcxpresso_supp — Wed, 10 Jan 2024 10:24:39 GMT

I'd say Image Info view would also be useful - go to Window => Show View => Other => Image Info.

Regards,
MCUXpresso IDE Support