topic Re: MCUXpresso IDE: Error , Error received while booting LinkServer in MCUXpresso IDE

MCUXpresso IDE: Error , Error received while booting LinkServer

CEPL_Dev — Tue, 23 May 2023 16:40:04 GMT

Hi, I have been using MCUXpresso IDE version v11.3.0_5222 on my windows 10 system and few weeks back I have upgraded to Windows 11 . And since last week I am getting an error, which is attached below. I am using LPC-Link2 Debug Probe. By assuming it might be some compatibility issue, I have upgraded to MCUXpressoIDE_11.7.1 , and still the issue is not resolved. I am Looking for suggestions to fix this issue . Thanks , Amal

Re: MCUXpresso IDE: Error , Error received while booting LinkServer

Pavel_Hernandez — Tue, 23 May 2023 20:52:45 GMT

Hello, my name is Pavel and I will be supporting your case, at this moment the last version is the 11.3 but this only work good in win10, there are some errors about the compatibility in win11, I recommend return to win10.

Best regards,
Pavel

Re: MCUXpresso IDE: Error , Error received while booting LinkServer

CEPL_Dev — Wed, 24 May 2023 05:26:20 GMT

Hi Pavel ,

Thanks for the response.

I also tried MCUXpressoIDE version 11.7.1, on windows 11, same link server error is coming. Any fix for that .

or using other debugging tools like J-Link might fix the problem?

Thanks,

Amal

Re: MCUXpresso IDE: Error , Error received while booting LinkServer

Pavel_Hernandez — Wed, 24 May 2023 22:03:14 GMT

Hello, you could try to run the IDE with an older compatibility of windows, and about the J-Link if you want to flash your target, you can use J-link commander o BLHOST.

Best regards,
Pavel

Re: MCUXpresso IDE: Error , Error received while booting LinkServer

CEPL_Dev — Thu, 25 May 2023 05:02:13 GMT

Hi Pavel,

thanks for the support,

Have a nice Day.

Regards,

Amal