topic Re: How to relocate & debug program into new flash section? in MCUXpresso IDE

How to relocate & debug program into new flash section?

jmreina — Fri, 19 May 2023 13:52:37 GMT

We have a program with three separate flash sections. The program compiles & debugs fine with default config (e.g. from BOOTLOADER below, in '1. Memory Config')

Sections: BOOTLOADER, APPLICATION & REVERT

Issue:

When the program is placed in APPLICATION the program compiles but cannot debug! (see '2. Error I/II')

How can we get debugging working here for a program in the APPLICATION flash section?

Re: How to relocate & debug program into new flash section?

ZhangJennie — Mon, 22 May 2023 06:25:13 GMT

Hi jmreina

Are your bootloader and application in the same project or separated two projects?

If the same project, please create a demo project to show me how to reproduce the issue?

Thanks,

Jun Zhang

Re: How to relocate & debug program into new flash section?

jmreina — Mon, 22 May 2023 11:24:25 GMT

Separate right now! I can share two separate projects for demonstration let me know