iMXRT1020 EVK Debug SocketException

AlperSefa — Thu, 25 Aug 2022 08:17:03 GMT

Hello,

I have a 700-29856 Rev.B1 1020 EVK. I switched SW8 3th pin also. But i cannot debug.

Re: iMXRT1020 EVK Debug SocketException

Hui_Ma — Thu, 01 Sep 2022 06:40:09 GMT

Hi,

First of all, sorry for the later reply.

I only have Rev A RT1020 evaluation board on hand and could not do a onsite test.

Could you help to check if all jumpers setting, especially for J1 (shunt at 5-6)?

Your SW8 setting is correct.

During the project debug entrance phase, if there will showed below debugger was found:

Thank you for the attention.

Mike