MCUXpresso IDEのトピックRe: issue in adding external library

issue in adding external library

anshun — Fri, 24 Sep 2021 03:45:19 GMT

I want to add an external library in my project but getting the error as" error adding symbols, file format not recognized" I have followed the below steps:

Add lib folder and .a library to the project workspace

2.Make sure you only specify library_name. in the project settings

For example, if you have a library called libmyxml.a, you will specify myxml in the Linker Libraries settings.

Note that you will also need to specify the location that you have placed the library archive in the Library search path (-L) setting

3. Add the lib to Project -> Properties -> C/C++ Build -> Settings -> Tool Settings

-> MCU Linker -> Libraries -> Libraries (-l)

kindly help.

Thanks

Re: issue in adding external library

KalaimaniArumugam — Fri, 24 Sep 2021 04:13:46 GMT

anshun

You try this method its woks fine for me

https://mcuoneclipse.com/2013/02/12/creating-and-using-libraries-with-arm-gcc-and-eclipse/

Re: issue in adding external library

ErichStyger — Fri, 24 Sep 2021 04:19:44 GMT

Are you sure the library has been compiled for the MCU you are using?

It seems that the content is not compatible with what you have.

I hope this helps,

Erich

Re: issue in adding external library

anshun — Fri, 24 Sep 2021 06:37:43 GMT

this link is not opening

Re: issue in adding external library

ErichStyger — Fri, 24 Sep 2021 06:40:24 GMT

Try this one:

https://mcuoneclipse.com/2013/02/12/creating-and-using-libraries-with-arm-gcc-and-eclipse/

Erich

Re: issue in adding external library

anshun — Fri, 24 Sep 2021 07:38:45 GMT

the library which i have contains the header file and .a file.

I tried to compile it in a separate project and get another .a file.

But when i use the APIs of this library in main project, it shows undefined reference,

Re: issue in adding external library

anshun — Fri, 24 Sep 2021 07:39:42 GMT

.a file is already there but how to make it compatible with the ide i am using ?

Re: issue in adding external library

ErichStyger — Fri, 24 Sep 2021 07:45:00 GMT

The archive (.a) is basically a collection of compiled object (ELF/Dwarf) files. The library needs to be compiled for your target (same processor) and be compatible with the toolchain used (e.g. GCC, memory model, EABI used, etc).

Ideally you have all the source files to build that .a file. If not, you need to contact the vendor/provider of that .a file.

Erich

Re: issue in adding external library

anshun — Fri, 24 Sep 2021 07:51:29 GMT

Ok, Thank you

Re: issue in adding external library

converse — Fri, 24 Sep 2021 10:37:04 GMT

Where did you get the library from? From your description, I suspect that you did not get the correct ARM version of the library. Did you get the x86 version? Or perhaps a version for ARM Linux?

Re: issue in adding external library

anshun — Mon, 27 Sep 2021 04:28:19 GMT

Yes, i got x86 version.

when i build my project just by adding the library it gets build. But when I call those APIs it shows undefined reference error.

Re: issue in adding external library

ErichStyger — Mon, 27 Sep 2021 04:13:30 GMT

You cannot link an ARM binary with a binary/archive/library compiled for x86. It simply cannot work. You will need a library built for the same ARM architecture.

I hope this helps,

Erich